KLX 650 C Conversion to Rally Rig
+2
Tobys 2 strokes
Flyingwheel
6 posters
Page 2 of 5
Page 2 of 5 • 1, 2, 3, 4, 5
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:24 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:30 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:31 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:31 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:32 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:32 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:33 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:33 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:34 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:34 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:35 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
Last edited by Flyingwheel on Sun Oct 20, 2019 6:35 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
there is some rust issues that need attention
Last edited by Flyingwheel on Sun Oct 20, 2019 6:36 pm; edited 2 times in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
we put the bike together but it seems rather low
Last edited by Flyingwheel on Sun Oct 20, 2019 6:37 pm; edited 3 times in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
so we installed this custom made links
we got iron and drilled through it
we got iron and drilled through it
Last edited by Flyingwheel on Sun Oct 20, 2019 6:38 pm; edited 3 times in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
with this simple trick
we raised the bike about 20 centimeters (about 8 inches)
we raised the bike about 20 centimeters (about 8 inches)
Last edited by Flyingwheel on Sun Oct 20, 2019 11:39 pm; edited 4 times in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
back to the stand in the shop
Last edited by Flyingwheel on Sun Oct 20, 2019 6:39 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
needed to bleed rear brake and change pads
Last edited by Flyingwheel on Sun Oct 20, 2019 6:20 pm; edited 1 time in total
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
adjusting the passengers footpegs
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
installed a license plate holder from a ktm lc640
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
we install the 19 liters tank
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
we start now testing how the KTM fairing and headlight assembly would fit
Flyingwheel- Posts : 164
Join date : 2019-10-20
Re: KLX 650 C Conversion to Rally Rig
we build support brackets that we will cushion with plastic tubes around the fixing bolts as you can see in the picture
Once the structure has been fixed, we make sure the tubes do not interfere with the movement of the forks when turning the handlebar, we proceed to support and affix the fairing
Once the structure has been fixed, we make sure the tubes do not interfere with the movement of the forks when turning the handlebar, we proceed to support and affix the fairing
Flyingwheel- Posts : 164
Join date : 2019-10-20
Page 2 of 5 • 1, 2, 3, 4, 5
Page 2 of 5
Permissions in this forum:
You cannot reply to topics in this forum
|
|